Dead Pixel Test
Check a new monitor, laptop, TV or phone screen for dead pixels, stuck pixels and backlight bleed. The test fills the whole screen with one colour at a time, so any pixel that doesn't light up the right way stands out.
COLOURS
How to test
- Clean the screen and turn the brightness up.
- Press Start full screen and look over every part of the screen for each colour.
- Click or press → for the next colour, ← to go back, Esc to leave.
SCREEN · BLACK
Bright dots are stuck pixels; light at the edges is backlight bleed.
What each colour shows
- Black: stuck pixels (bright dots) and backlight bleed (light leaking in at the edges or corners).
- White: dead pixels (black dots), dust under the screen and pressure marks.
- Red, green and blue: a stuck or dead subpixel shows up as a dot of the wrong colour on one of them.
- Grey: uneven brightness, such as clouding on LCD screens or banding.
Tips
- Look from straight in front of the screen and at your normal distance, then up close.
- Use a magnifier or your phone's camera zoom to check a suspicious dot.
- OLED screens don't have backlight bleed, but they can show burn-in: faint shapes on grey or white.
Nothing is recorded or sent anywhere: the test is just colours drawn by your browser.
How to test your screen for dead pixels
- 1
Get the screen ready
Wipe the screen with a dry microfibre cloth so dust isn't mistaken for a pixel, turn the brightness up, and for backlight bleed, dim the room.
- 2
Start the full-screen test
Press Start full screen. Click, tap or press the right arrow to go through black, white, red, green, blue and grey, and look slowly over the whole screen for each colour.
- 3
Note what you find
A dot that stays bright on black is stuck; one that stays black on white is dead. Press Esc, or swipe down on a phone, to leave. Note where the faulty pixels are before you contact the seller.
Frequently asked questions
What's the difference between a dead and a stuck pixel?
A dead pixel never lights up, so it shows as a black dot on every colour and is easiest to see on white. A stuck pixel stays on one colour, often red, green or blue, and is easiest to see on black or on the other colours.
Can a stuck pixel be fixed?
Sometimes. Cycle colours flashes red, green, blue and white over the screen for a while, which can wake up a stuck subpixel; leave it running for 10 to 20 minutes. Gently massaging the spot with a soft cloth while the screen is off also helps now and then. A dead pixel can't be fixed.
Is the cycle mode safe to watch?
It flashes bright colours, so don't use it if you or anyone who can see the screen is sensitive to flashing light, as with photosensitive epilepsy. The page warns you before it starts, keeps it under three changes a second, and stops on any tap or key. You don't need to watch it; you can look away while it runs.
How many dead pixels are acceptable?
It depends on the maker. Most follow the ISO 9241-307 pixel classes, and many allow a few faulty pixels before a screen counts as faulty, while some promise zero dead pixels. Check the warranty, and test a new screen within the return period.
Does it work on phones and TVs?
Yes. Open the page in the device's browser. On iPhones, where pages can't go fully full screen, the test covers the whole page instead; hide the address bar by scrolling or turning the phone for the best view. On a smart TV, use the arrow keys on the remote.